Industrial Estate, Muzaffarnagar, Uttar Pradesh
- GST NO. : 09AGSPA6716B1ZI
Ready Emulsifiers
Ready emulsifiers for cationic bitumen emulsions are special grade of pre-acidified and activated emulsifiers specially for no-frill on-site production of different grade of these emulsions without a big bitumen emulsion plant setup and to maintain the quality of bitumen emulsion up to own standards.
These emulsifiers are added into hot water and then this soap water is passed through a compact colloid mill with hot bitumen to get cationic bitumen emulsion instantly. The benefits of Ready Emulsifiers are:
- Maintaining the quality and avoiding material theft / water mixing during transportation.
- Fresh material made at site in required quantity hence avoiding construction delays.
- Material made with a very small bitumen emulsion site plant and compact colloid mill.
- Exceptional saving in bitumen emulsion cost.
- Saving of transportation cost involved.
- Any time availability of fresh bitumen emulsion even for late hours or night working.
Our cationic ready emulsifiers are :
- Emulsifiers for Rapid / Medium Setting Cationic Bitumen Emulsions: PSEM-RMS-DMR
- Emulsifiers for Slow Setting Cationic Bitumen Emulsions: PSEM-SS-ABTR
| Business Type | Manufacturer, Exporter |
Preferred Buyer From
| Location | Anywhere in India |
Description :
“PSEM-RMS-DMR” is pre-acidified emulsifier with added performance additives for on-site production of Rapid and Medium Setting Cationic Bitumen Emulsions. This product is liquid even at low temperatures so is very convenient to use compact batch type on-site bitumen emulsion plants. Emulsions made using recommended dose of this product pass standard tests and show very nice performance in field.
Physical Properties :
“PSEM-RMS-DMR” is dark color liquid at room temperature with acrid acidic odor. This product is miscible with cold water and highly soluble in hot water. In recommended doses, it does not have any effect on physical properties of bitumen used for production of emulsions. This emulsifier can be well used with VG-10 grade of bitumen and provides a vide choice for production of different grades of bitumen emulsions including tack coat emulsion, surface dressing emulsion, penetration macadam, pot-hole patching, dust suppression emulsion etc. Since this product has been pre-acidified, there is no need of handling and using additional acid which makes it safer for the production.
Chemical Properties :
- Specific Gravity : ~ 1.15
- Flash Point: > 130 Degree C
- Active Nitrogen : ND
- Water Content :< 10%
- Active content :60%
- Shelf Life : 3 months from the date of production.
- Colour : Dark Turbid liquid.
- Compatibility : Bitumen VG-10 & VG-30.
| Business Type | Manufacturer, Exporter |
Preferred Buyer From
| Location | Anywhere in India |
Description :
“PSEM-SS-ABTR” is pre-acidified emulsifier with added performance additives for on-site production of Slow Setting Cationic Bitumen Emulsions. This product is liquid even at low temperatures so is very convenient to use in compact batch type on-site bitumen emulsion plants. Emulsions made using recommended dose of this product pass standard tests and perform very well in field of application.
Physical Properties :
“PSEM-SS-ABTR” is dark color liquid at room temperature with acrid acidic odor. This product is miscible with cold water and highly soluble in hot water. In recommended doses, it does not have any effect on physical properties of bitumen used for production of emulsions. This emulsifier can be well used with VG-10 grade of bitumen and provides a vide choice for production of different grades of bitumen emulsions including prime coat emulsion, cold-mix emulsion, emulsion for soil stabilization, emulsion based repair grouts etc. Since this product has been pre-acidified, there is no need of handling and using additional acid which makes it safer for the production.
Chemical Properties :
- Specific Gravity : ~ 1.10
- Flash Point: > 130 Degree C
- Active Nitrogen : ND
- Water Content :< 10%
- Active content :50%
- Shelf Life : 3 months from the date of production.
- Colour : Dark Turbid liquid.
- Compatibility : Bitumen VG-10 & VG-30.
